Adjusting The Ez-Tracktm Refrigerator Shelf - Whirlpool ET22DKXDB00 Use And Care Manual

Adjusting the EZ-TrackTM refrigerator shelf
The EZ-Track shelf slides from side to side for more
flexible storage in your refrigerator.
To slide shelf side-to-side:
1. Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE:
You do not have to remove small items from
the shelf before moving it side-to-side. You may need
to remove larger items.
To remove the shelf:
ml
1. Remove all items from the shelf.
2. Hold back of shelf with one hand.
3. Lift front of shelf to 45" angle.
4. Lower shelf slightly to release shelf from upper
channel of track. Then pull shelf straight out.
NOTE: Shelf
is heavy. Make sure you use both hands
when removing shelf.
Hold with both hands
and lift front to 45" angle.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
To replace shelf track:
1. Guide track hooks into the shelf support slots on
the back wall of the cabinet.
NOTE: Make sure both track hooks are in slots and
that the slots are parallel to each other.
2. Push track backward and down.
3. Check that track is completely seated in the
shelf supports.
Lift front slightly
then slide to new location.
Upper channel
Make
sure
both
sets of
hooks
are in
support
slots.
Hold both sides and
lift up and out.
Shelf
'support