Inserting The Label Cassette; Cutting The Labels - Dymo MobileLabeler User Manual

Inserting the Label Cassette

Your label maker uses DYMO D1 label cassettes. Visit www.dymo.com for
information about purchasing additional label cassettes.
To insert the label cassette
Press and then pull outward to
1
open the side cover of the label
maker. See Figure 6.
Make sure the tape and ribbon are
2
taut across the mouth of the
cassette and that the tape passes
between the label guides. See
Figure 6.
If necessary, turn the ribbon rewind
spool clockwise to tighten the
ribbon.
Insert the cassette and press firmly
3
until the cassette clicks into place.
Close the side cover of the label
4
maker.

Cutting the Labels

The label maker has an automatic cutter which will cut the label after each label is
printed. Clear the label exit slot of labels after every 10 labels to prevent a label
jam.
9 DYMO MobileLabeler
User Guide
Ribbon rewind
spool
Figure 6
Label guides