Bluetooth Status Light - Dymo MobileLabeler User Manual

To change the discovery mode
Connect the MobileLabeler label maker to the computer where you have
1
DYMO Label software installed.
From DYMO Label software, select the MobileLabeler
2
label maker as the current printer.
Click to open MobileLabeler Options.
3
Select the desired discovery option.
4

Bluetooth Status Light

The Bluetooth status light visually shows the connection status of the label maker.
Status Light
Off
Blinking
Solid
RESET
The RESET button resets the label maker to the factory default settings. Resetting
the label maker results in the loss of all current settings, including all Bluetooth
settings. Press this button only if you want to erase all current information on the
label maker.
To press the RESET button, use a narrow pointed object such as the tip of a pen
or pencil.
6 DYMO MobileLabeler
User Guide
Label Maker Status
The label maker is not discoverable.
The label maker is discoverable.
The label maker is connected.