Cleaning The Print Head - Dymo MobileLabeler User Manual

Cleaning the Print Head

The print head is very delicate, so use care when cleaning.
To clean the print head
Disconnect the power adapter, if
1
connected.
Press and then lift to open the
2
side cover of the label maker.
Remove the label cassette and
3
battery.
Use a small, soft brush or cotton
4
swab to wipe away dust and other
stray particles from the inside of the
label compartment.
Remove the cleaning tool from inside
5
the label compartment cover.
If you do not have a cleaning tool,
contact DYMO Customer Care
(http://support.dymo.com).
Gently wipe the padded side of the
6
tool across the print head. See
Figure 9.
Insert the label cassette and close the cover.
7
15 DYMO MobileLabeler
User Guide
Print head
Cleaning tool
Figure 9