Table of Contents
Advertisement
23 Anti-tipping support
23.1 Height adjustment
The anti-tipping support versions "central anti-
tipping supports oversized, rigid welded"
and "2 anti-tipping supports with oversized
tube" can be height adjusted by changes to
the anti-tipping support forks. The procedure
varies with quick-release and screw-on axles.
Figure 55: Central anti-tipping supports oversized,
rigid welded
Figure 56: 2 anti-tipping supports with oversized
tube
25
Operating instructions SPEEDY F1
For anti-tipping support forks with screw-on
axles, the height of the anti-tipping support
wheel above the ground can be set to different
heights by replacing or adding spacers with
different heights. If you need spacers to make
adjustments, please contact your rehabilitation
specialist dealer or PRO ACTIV.
Figure 57: Anti-tipping support forks with screw-on
axles
For anti-tipping support forks with quick-
release axles, the height of the anti-tipping
support wheel above the ground can be
adjusted by the screw-in depth of the threaded
bushing in the fork. If the anti-tipping support
wheel should have more clearance to the
ground, turn the threaded bushing further into
the anti-tipping support fork. If the anti-tipping
support wheel should have less clearance to
the ground, turn the threaded bushing further
out of the anti-tipping support fork. Loosen the
M20 lock nut (AF 27 mm), change the screw-in
depth of the threaded bushing and then tighten
up the M20 lock nut (AF 27 mm) to 35 Nm.
Spacer
Advertisement
Table of Contents
