Table of Contents
Advertisement
Operating instructions SPEEDY F1
with thread lock fluid. Lastly, the "Cap BK19
M12" is pressed onto the M12 fixing screw
again.
23.2.2 Anti-tipping support fork with quick-
release axle
The removal of the anti-tipping support fork
with quick-release axle is done using the
locking knob on the anti-tipping support
bearing block and the holding tape. Pull the
holding tape upwards and simultaneously
press on the locking knob with your thumb.
The anti-tipping support fork now falls out of
the anti-tipping support bearing block
Locking knob on the anti-
tipping support bearing block
Figure 73: Anti-tipping support fork with quick-
release axle
Figure 74: Anti-tipping support fork with quick-
release axle, fork removed
Holding tape
Anti-tipping
support fork
axle
Figure 75: Anti-tipping support fork removed
To assemble the anti-tipping support fork
with quick-release axle, press the locking
knob again and insert the anti-tipping support
fork from underneath onto the anti-tipping
support fork axle. When doing this, pay special
attention to ensure that the locking knob
springs all of the way out after attaching the
fork again, otherwise the anti-tipping support
fork is not properly secured.
23.3 Replacing the anti-tipping support
wheel
The procedure to replace the anti-tipping
support wheel is the same as replacing the
caster wheel. To do this, follow the instructions
in chapter 21.1.
24 Ram bar
Ram bars versions are available for the
Basketball-Sport:
Offence bar with radius arch
Offence bar with trapezium tube
Defence bar
Rear ram bar
The ram bars are fixed firmly to the frame and
therefore cannot be removed or adjusted.
30
Advertisement
Table of Contents
