Table of Contents
Advertisement
Basic Safety Information
1.6.1
Servicing
1.6.2
Inspection
1.6.3
Repairs
1.6.4
Commissioning
1.7
Labelling, test certificate and standards
1.8
Warranty
EN 4/61
7" Industry Tablet
- Lumen X7
Type B7-A23.-2.../........
No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter "Service, inspection,
repair" in this respect.
According to EN/IEC 60079-17 and EN/IEC 60079-19, the operator of electrical systems
in potentially explosive atmospheres is obliged to have these inspected by an electrician
to ensure correct condition.
Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
It must be checked that all components and documents are available before
commissioning.
Labels on explosion protection and the test certificate are attached to the Industry Tablet.
See Chapter 3 "Technical data" with respect to labelling.
The guidelines and standards applicable to the Industry Tablet for devices and protected
systems for intended use in potentially explosive atmospheres are provided in Chapter 3
"Technical data".
WARNING
No changes or retrofits may be made without the written consent of the
manufacturer.
If non-specified components are used, the explosion protection will no longer be
guaranteed. In the case of externally procured parts, it is not guaranteed that these
have been designed and manufactured in accordance with their load and requisite
safety.
Contact the manufacturer before any changes or retrofits to receive a release.
Only use original spare and wearing parts.
Subject to technical changes.
03/2016
Advertisement
Table of Contents
