Options To Install The Operating System - Dell PowerEdge FC630 Owner's Manual

Interfaces Document/Section
Dell Deployment See Dell Deployment Toolkit User's Guide at Dell.com/openmanagemanuals
Toolkit
Dell Lifecycle See Dell Lifecycle Controller User's Guide at Dell.com/idracmanuals
Controller
CMC Web See Dell Chassis Management Controller Firmware User's Guide at Dell.com/
interface esmmanuals
You must use the default iDRAC IP address 192.168.0.120 to configure the initial network settings,
including setting up DHCP or a static IP for iDRAC.
NOTE: To access iDRAC, ensure that you install the iDRAC port card or connect the network cable
to the Ethernet connector 1 on the system board.
NOTE: Ensure that you change the default user name and password after setting up the iDRAC IP
address.
Log in to iDRAC
You can log in to iDRAC as:
• iDRAC user
• Microsoft Active Directory user
• Lightweight Directory Access Protocol (LDAP) user
The default user name and password are root and calvin. You can also log in by using Single Sign-On
or Smart Card.
NOTE: You must have iDRAC credentials to log in to iDRAC.
For more information about logging in to iDRAC and iDRAC licenses, see the Integrated Dell Remote
Access Controller User's Guide at Dell.com/idracmanuals.

Options to install the operating system

If the system is shipped without an operating system, install the supported operating system by using one
of the following resources:
Table 19. Resources to install the operating system
Resources
Dell Systems Management Tools and
Documentation media
Dell Lifecycle Controller
Dell OpenManage Deployment Toolkit
Dell certified VMware ESXi
Supported operating systems on Dell PowerEdge
systems
26
Location
Dell.com/operatingsystemmanuals
Dell.com/idracmanuals
Dell.com/openmanagemanuals
Dell.com/virtualizationsolutions
Dell.com/ossupport