Dell PowerEdge FC630 Owner's Manual page 13

Figure 5. Hard drive or SSD indicators
1. drive activity indicator (green)
NOTE: If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the
right side) does not function and remains off.
Drive-Status Condition
Indicator
Pattern
Flashes green
Identifying drive or preparing for removal
twice per second
Off
Drive ready for insertion or removal
Flashes green,
Drive predicted failure
amber, and then
turns off
Flashes amber four
Drive failed
times per second
Flashes green
Drive rebuilding
slowly
Steady green
Drive online
Flashes green for
Rebuild stopped
three seconds,
NOTE: The drive status indicator remains off until all drives are initialized after
system power is applied. Drives are not ready for insertion or removal during
this time.
2. drive status indicator (green and amber)
13