To Save And Repeat A Number; To Leave A Message - NEC DT730 User Manual

TO SAVE AND REPEAT A NUMBER

To Save
Press Speaker key.
Dial desired telephone number.
Press S&R. Dialed number is now stored. S&R
LED lights.
– Or –
Receive internal call.
Press S&R. Number is stored in memory.
S&R LED lights.
Using the Soft Key
Press S&R. Number is stored in memory.
S&R LED lights.
To Verify (only for terminal with LCD)
While idle, press S&R.
Display indicates digits sorted.
To Repeat
Press Speaker key.
Press S&R. DT Series automatically redials the
programmed number.
S&R automatically cancelled. LED goes out.
Note:
If saved number is busy or no answer is received,
to save it again, press S&R again before hanging
up.
Using the Soft Key
Press flashing S&R Soft Key. Stored number is
automatically redialed. "S&R" disappears from dis-
play.

TO LEAVE A MESSAGE

Press Speaker key. Receive dial tone.
Dial desired station number. Encounter no answer
or busy condition.
Press MSG. Message is sent to called DT Series.
Called station MSG LED lights.
MESSAGE SET
4:26 PM
Note 1: Up to four messages can be stored in DT Series
memory.
Note 2: If a fifth message is attempted, reorder tone is
heard and display indicates as follows:
MESSAGE BUSY
4:26 PM
Note 3: If station is not equipped to receive messages, re-
order tone is heard and display indicates as fol-
lows:
MESSAGE REST
4:26 PM
116
Called station
2001
TUE 13 APR 2004
TUE 13 APR 2004
TUE 13 APR 2004