Check And Carry Out Commissioning - Berbel BKH 90 GL Operating And Installation Instructions

Installation

3.5.12 Check and carry out commissioning

ATTENTION!
Risk of disruptions due to moisture in the device.
If the device is moved from a cold environment into a hot
one, condensation may form inside.
☞ Wait about 2-3 hours before bringing the device into
service.
☞ Check that the mains plug is freely accessible or that
an all-pole isolating device (min. 3 mm contact gap) is
present.
☞ Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
☞ Ensure that air outlets are not closed or covered.
☞ With recirculating devices: Make sure that the ventilation
slots are free.
☞ Check the correct functioning of the device.
D "4. Operation" (page 96).
6002644_0 – 20.01.2016
95