Table of Contents
Advertisement
(6) Press the ENTER key
This starts the terminal program and displays the password entry screen.
(7) Enter the password at the [Password:] prompt.
The default factory setting is no password. To login, just press the Enter key without entering
anything.
FLEXLAN Firmware Version 1.00
Password:
Figure 4.9 Password Entry Screen
This displays the TOP menu.
[TOP]
1. Exit
2. Configure
3. Write Configuration
4. Reboot
5. Updata System Parameters
6. Download
7. Upload
8. Default
9. Status
=>
Figure 4.10 TOP Menu
CAUTION
The console program uses the "Shift-JIS" character set for Kanji codes. If characters do not display
correctly, check the Kanji code setting for the terminal.
FX-DS540-AP, FX-DS540-APP
Date: xxxx-xx-xx Time: xx:xx:xx
4 Setup Preparation
51
Advertisement
Table of Contents
