Table of Contents
Advertisement
4 Setup Preparation
(3) Enter a name in the [Name] field of the [Setup Connection] dialog, select an icon, then click [OK].
You can enter whatever you wish in the [Name] field. Enter a meaningful name (such as
"FLEXLAN").
Figure 4.7 Selection of an Icon
(4) Select [Connection Type] and click [OK].
Select the COM port to which you connected the RS-232C cable.
(5) Set the [Port Settings] to the values shown below, then click [OK].
Figure 4.8 Port Settings
50
FX-DS540-AP, FX-DS540-APP
Advertisement
Table of Contents
