Contec FX-DS540-APP User Manual page 3

Product Configuration List <FX-DS540-APP>
- Main unit (FX-DS540-APP), CF card (Used to start up the system. Already plugged)...1
- Antenna (The dipole antennas that attach to the FX-DS540-APP)...2
- Antenna connector cover (Cover for the connector of the antenna)...2
- Spacer (Used when the main unit is installed, for example, on a wall)...4
- Installation diagram (Used when the main unit is installed)...1
- Magnet (for mounting on metallic surfaces)...4
- CF card Clip...1
(Used to prevent CF card falling out when inserted in the FX-DS540-APP)
- Front seal (for dust ingress protection)...1
(The CF1 slot can be used if it is difficult to use the bundled CF card in the CF2 slot for maintenance
reasons.)
- External-toothed screw (Used for grounding via the ground terminal)...1
- clump...1
- Cable Tie...1
- AC Adoptor...1
- This User's Manual (this booklet)...1
FX-DS540-APP
Front seal
AC Adoptor External-
toothed
screw
ii
Antenna connector
cover x 2
Antenna x 2
Spacer x 4
Installation
User's Manual
diagram
Installation
User's Manual
diagram
Clump
Magnet x 4
Cable Tie x 2
CF card Clip
FX-DS540-AP, FX-DS540-APP