Contec FX-DS540-APP User Manual page 33

3 Setup
Antenna
Transmits and receives radio waves.
LED Indicators
Nine LEDs (seven on the front and two on the back) indicate the user unit connection,
transmission/reception, power supply, and wired LAN connection status.
Table 3.1 LED Display during Normal Operation
Name
POWER
Flashing
LINK
TX/RX Flashing
WLINK
WTX/RX Flashing
Flashing Indicates that the CF1 slot is being accessed.
CF1
Flashing
Flashing Indicates that the CF2 slot is being accessed.
CF card plugged
Flashing
CF2
Wireless card
plugged
24
Status
Indicates that the device is operating.
On
Indicates that the device is being started (going to
operate after the power switch was turned on).
On Indicates that a wired LAN has been connected.
Indicates that a wired LAN has been unconnected.
Off
Indicates that wired LAN data is being
transmitted/received.
On Indicates that a user unit (5 GHz) has been logged in.
Indicates that no user unit (5 GHz) has been logged
Off
in.
Indicates that user unit (5 GHz) data is being
transmitted/received.
Indicates an error occurring.
twice.
Indicates an error occurring.
twice.
Indicates that a user unit (2.4 GHz) has been logged
On
in
Indicates that no user unit (2.4 GHz) has been logged
Off
in.
Indicator
FX-DS540-AP, FX-DS540-APP