Table of Contents
Advertisement
DIP switches
These are used for settings such as the wireless channel, and initializing the AP.
Table 3.2
DIP Switches
Item
1 Reserved
OFF
These switches are used to configure channels.
A network group can be isolated by changing channel settings.
2 CHANNEL1
Setting the switches allows four groups of independent networks to be
constructed.
CHANNEL1
OFF
3 CHANNEL2
OFF
OFF
OFF
Channels 34, 38, 42, and 46 can be set with the above switch settings.
Channels 34, 38, 42, and 46 can also be set by means of software.
4 CHANNEL3
To set channels using software, set DIP switch channel setting to
"Disabled".
Used to initialize the AP.
Turning on this switch makes the POWER, MGMT, WLINK, and
WTX/WRX LEDs blink.
5 INIT
Turning this DIP switch off before (about 3 seconds) staying
illuminated from being blinking resets all the AP's settings to their
factory defaults the next time the AP is started.
6 Reserved
OFF
7 Reserved
OFF
8 Reserved
OFF
FX-DS540-AP, FX-DS540-APP
Operation / function
CHANNEL2
CHANNEL3
OFF
OFF
OFF
ON
ON
OFF
ON
ON
Channel
Number
ch34
ch38
ch42
ch46
3 Setup
25
Advertisement
Table of Contents
