Unpacking Your Fan; Parts Inventory - Ellington E-DER54ESP5CR Installation Manual

1. Unpacking Your Fan.

Carefully open the packaging. Remove items from
Styrofoam inserts. Remove motor housing and
place on carpet or Styrofoam to avoid damage to
finish. Do not discard fan carton or Styrofoam
inserts should this fan need to be returned for
repairs.
Check against parts inventory that all parts have
been included.

2. Parts Inventory.

d. 12in. downrod and hanging ball. 1 piece
e. scroll arm support. 1 piece
h. switch housing plate. 1 piece
k. safety cable (already attached to motor). 1 piece
l. wall control and plate. 2 separate pieces
r. remote control transmitter. 1 piece
s. remote control receiver. 1 piece
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
a. canopy. 1 piece
b. hanging bracket. 1 piece
c. yoke cover. 1 piece
f. motor assembly. 1 piece
g. switch housing. 1 piece
i. blade arm. 5 pieces
j. blade plate. 5 pieces
m. blade. 5 pieces
n. motor housing. 1 piece
o. glass shade. 1 piece
p. canopy cover.1 piece
q. scroll arm. 3 pieces
t. hardware packs
a
f
j
m
n
q
p
t
required bulbs:
6 x 7 watt max. candelabra base bulbs
page 2
c
b
e
g
i
k
o
r
s
(included)
d
h
l
w/remote
w/wall
control