Using Your Smart Drive - Fisher & Paykel GW711 Use And Care Manual

POWER AND WATER
LOADING
DETERGENT
FABRIC SOFTENER

USING YOUR SMART DRIVE

1. Turn on the power and water supplies.
2. • Remove fabric softener dispenser.
• Place the load evenly around the
agitator. (Refer to Sorting and Loading
pages 21).
3. • Use the mark on the agitator, nearest
to the top of the clothes, as a guide to
the correct amount of detergent to
use.
• Pour the detergent down the centre of
the agitator stem. Replace the fabric
softener dispenser (this stops small
articles falling down the centre of the
agitator). (Refer to Detergent page 22).
4. • If you wish to use fabric softener, place
it in the dispenser on the top of the
agitator.
• Fabric softener must not be used if
you have selected the Water Saver
option.
(Refer to Fabric Softener page 23).
5