Fisher & Paykel GW711 Use And Care Manual page 33

IF YOUR SMART DRIVES BEEPS FOR HELP
LIDLOCK light is flashing.
First RINSE or SPIN light is
flashing as well as the
Spin Speed light.
SINGLE BEEP EVERY SECOND AND.. POSSIBLE SOLUTIONS
Some lights are on but the pattern
of lights is unfamiliar.
1. Make sure the lid is closed.
2. Press START/PAUSE (refer to page 7).
3. If the symptom persists call your Fisher &
Paykel Dealer or Authorised Service Centre.
1. Wash load is out of balance. Ensure the
machine is stationary. Manually
redistribute the load. Check the machine is
level (refer to page 2A).
1. Turn your machine off at the wall,
2. Wait for 60 seconds and turn it back on.
3. Check the machine is level (Refer to Page 1A).
4. Remove load and retry.
5. Put through a Deep Rinse and Spin.
6. If the fault re-occurs repeat Step 1.
If the machine still will not work call your
Fisher & Paykel Dealer or Authorised Service
Agent to arrange service.
31