SPIN HOLD
TIME SAVER
-
models only
DELAY START
-
models only
Use the Spin Hold option to:
•
Remove drip dry garments from a mixed load
before the wash goes into spin.
•
Minimise the clothes creasing when they are left to
sit in the bottom of the bowl at the end of the
cycle.
When you have selected Spin Hold, your Smart Drive
will pause at the end of rinse, beep and the spin light
will flash to tell you that it is waiting for another
instruction.
Press START/PAUSE to begin the spin.
Time Saver allows you to shorten the wash cycle for
lightly soiled clothes. Selecting this option means that
the wash and spin times are reduced.
Time Saver can be turned on or off at any time during
the cycle.
Delay Start will delay the start of the wash cycle
for 1, 3 or 9 hours.
Press DELAY START once for a delay of 1 hour. Press
again for 3 hours, a third time for 9 hours (and again
to return to normal).
•
Once you press Delay Start your Smart Drive will
begin the delay period, you do not have to press
START/PAUSE.
•
Be careful if using Delay Start for non-colourfast
clothes as dyes may run if the clothes are damp.
•
Your Smart Drive will not beep at the end of the
cycle if Delay Start is selected.
WASH OPTIONS
11