Saving Water - Fisher & Paykel GW711 Use And Care Manual

SAVING WATER

26
RECYCLING THE WASH
WATER
-
models only
RECYCLING THE WATER
FROM DEEP RINSE
Model
GW711
GW611
GW511
MW511
MWC11
(Please note these are approximate figures for High water levels.)
• Full loads are more efficient than part loads.
• Use the Water Saver option. (Refer to page 12).
• Adjust the rinse option on Regular, Heavy Duty
and Wool cycles to one deep rinse.
(Refer to page 21).
• Adjust Auto Water Level to fill with less water.
(Refer to page 22).
Your Smart Drive also offers several ways of reusing
the wash and rinse water.
1. Select SOAK on the first wash cycle.
2. Remove the clothes at the end of the wash phase
and add the second load to the wash water.
3. Select the wash cycle for the second load.
You may need to add extra detergent.
4. Remove the second load at the end of the cycle.
5. Replace the first load, select rinse and complete
the cycle.
1. Select SPIN HOLD on the first wash cycle.
(You cannot use the Water Saver option when
recycling the water from deep rinse).
2. Remove the clothes at the end of the rinse and
add the second load to the rinse water.
3. Select the wash cycle for the second load.
4. Remove the second load at the end of the cycle.
5. Replace the first load and spin dry.
WATER CONSUMPTION - LITRES PER CYCLE
Litres per Water Saver
Fill (Excellence
Models)
90 l 150 l
75 l 130 l
65 l 110 l
65 l -
Spray & 1 Deep
Deep Rinse Rinse
175 l 165 l
150 l 140 l
130 l 120 l
130 l 120 l
2 Deep
Rinses
215 l
190 l
160 l
160 l