Opening Lists With The Message Key - Gigaset S670 User Manual

Opening lists with the
message key
You can use the message key f to open
the following list selection:
u
SMS list
If several mailboxes are set up
(page 30), several lists are displayed.
u
network mailbox, if your network pro-
vider supports this function and the
fast access is set for the network mail-
box (page 34).
u
Call history
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message:
Icon New message...
Ã
...on the network mailbox
Á
... in the call history
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
List selection
If you press the message key f, only the
lists that contain messages are shown
(exception: network mailbox). Lists with
new messages are identified in bold:
Messages & Calls
Mailbox (2)
SMS: (1)
Calls List: (4)
"
OK
Using the directory and lists
Select a list with q. To open, press v
or .
§OK§
If only one list contains entries, no list
selection is offered and the relevant list is
displayed immediately.
Incoming SMS message list
All received SMS messages are saved in
the incoming message list, page 28.
Call history
Precondition: Calling Line Identification
(CLIP, page 15)
Depending on the type of list set, the call
history contains
u
accepted calls (
u
missed calls
Depending on the type of list set, all num-
bers of the last 30 incoming calls are saved
or just the missed calls are saved. The list
of missed calls does not contain calls that
were answered.
You can also call up the call history via the
menu:
¢
v
Calls List
Setting the calls list type
¢ ¢ ¢
v Ð
Base
Missed Calls / All Calls
Select and press
a
Press and hold (idle status).
The calls list entries are retained when you
change the list type.
‰
)
Calls List Type
‰
( = on).
§OK§
23