Opening Lists With The Message Key - Gigaset S328 Operating Instructions Manual

Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / directories.fm / 21.07.2006
Using the directory, VIP directory and lists
(as in the directory
Display Number
page 17)
Copy to Directory
Copy an entry to the directory
(page 18).
Delete Entry (as in the directory page 17)
(as in the directory page 17)
Delete List
Opening lists with the
message key
You can use the Message key f to open
the following lists:
u
SMS list
If several mailboxes are set up
(page 27), several lists are displayed.
u
Network mailbox (Combox)
If your network provider supports this
function and the network mailbox
(Combox) is configured for fast access
(page 31).
u
Calls list
An advisory tone sounds as soon as a new
entry appears on a list. The key f
flashes. In idle status, the displays shows
an icon for the new message.
Icon New message
Ã
... in T-Net box
Á
... in calls list
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
Pressing the flashing key f will call up
the lists that contain the new messages.
Key f disappears on opening a list and
exiting the menu. If there are more new
entries, you can set the message key back
to flashing (page 20), e.g. to notify other
users of the new entries.
20
Setting message key to flashing
Requirement: There is at least one new
entry remaining in one of the lists.
f
Open calls list.
Set Message LED
Select and press
a
Press and hold (idle status).
Key f disappears on opening a list and
exiting the menu.
Calls list
Requirement: Calling Line Identification
(CLIP, page 12)
The numbers of the last 30 incoming calls
are stored. Depending on the
Type set, All Calls or just
stored.
Multiple calls from the same number are
stored as follows:
u
All Calls stored several times.
u
stored once (last call).
Missed Calls
The calls list is displayed as follows:
Calls List: 01+02
Number of new entries + number of old, read
entries
Setting list type for calls list
¢
f
Calls List: 01+02
List Type
/
Missed Calls All Calls
Select and
a
Press and hold (idle status).
The entries in the calls list are retained
when you change the list type.
.
§OK§
Calls List
Missed Calls are
¢ ¢
v
Calls
press (‰ = on).
§OK§