Advertisement
Quick Links
User Manual WEB
Charger for
LiFePO
Batteries
4
EN User Manual
Language specific user manuals are available on
www.mascot.no/downloads/usermanuals
Phone: +47 69 36 43 00 • Telefax: +47 69 36 43 01
E-mail: sales@mascot.no • Web: www.mascot.no
Doc.no. 5240A - Part No. 205240 - 05.11.2015
Bruksanvisning
Käyttöohjeet
Bedienungsanleitung
Mode d'emploi
Manual de instrucciones
Istruzioni per l'uso
MASCOT ELECTRONICS AS
P.O.Box 177, N-1601 Fredrikstad, NORWAY
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MASCOT LiFePO4
Summary of Contents for MASCOT LiFePO4
- Page 1 Manual de instrucciones Istruzioni per l’uso MASCOT ELECTRONICS AS P.O.Box 177, N-1601 Fredrikstad, NORWAY Phone: +47 69 36 43 00 • Telefax: +47 69 36 43 01 E-mail: sales@mascot.no • Web: www.mascot.no Doc.no. 5240A - Part No. 205240 - 05.11.2015...
-
Page 2: Important Safety Instructions
”IP67”, may be Technical specifications for your product: available. This version is filled with a potting See tables, the marking on the compound and is dust-tight and protected against product or www.mascot.no the effects of temporary immersion in water accor-... - Page 3 Cautions to observe prior to use • The intended use for this product is to charge a • The product is “switched on” by inserting the battery or a battery powered electrical accessory mains plug into the mains socket and “switched (NiCd/NiMH, Lead-Acid, Lithium-Ion or LiFePO 4 off”...
- Page 4 • If the product is specified to comply with the ”TERMS OF SALES AND DELIVERY FOR MAS- standard for Medical Electrical Equipment (stan- COT AS” apply (available at www.mascot.com). dards based on IEC60601-1) it complies with • Environmental parameters during transport and...
- Page 5 products imply a potential for electromagnetic degraded by such chemicals. Also make sure to or other interference between the product and position, operate and store such products away other devices. If such interference is suspected from UV-light and direct sunlight. please disconnect the product from the mains •...
- Page 6 • If the charger is disconnected from the mains for a 1Ah battery should be max 2A. Thus the voltage during a charge cycle the charger will typical minimum capacity recommendation is 1Ah for a 2A charger. For max battery capacity start a new charge cycle when it is reconnected we have used C/40 for chargers with timer (and/ to the mains.
- Page 7 Explanation of LiFePO 4 battery charge cycle (See tables for methods for each charger model.) Charging method A STEP 1 – BOOST CHARGE To start a charge cycle; connect the charger to the mains. The charger is in constant current mode, charging with the maximum current indicated on Orange the charger, the LED-indication on the charger is ORANGE.
- Page 8 Diagram: A Charging method B INDICATOR: ORANGE INDICATOR: GREEN STEP 1 – BOOST CHARGE Orange To start a charge cycle; connect the charger to the mains. Charge Voltage The charger is in constant current mode, charging with the maximum current indicated on Orange Charge Voltage the charger, the LED-indication on the charger is ORANGE.
-
Page 9: Battery Voltage
Charge Voltage Charging method C Charge Voltage Orange STEP 1 – BOOST CHARGE To start a charge cycle; connect the charger to the mains. Orange The charger is in constant current mode, charging with the maximum current indicated on Orange the charger, the LED-indication on the charger is ORANGE (or RED 9640). - Page 10 How to connect exchangeable DC-output plugs To connect for desired polarity, both plug ends are clearly marked. When connected, the female plug is also marked on each side to identify plug polarity. Shows the center polarity of the plug. How to connect exchangeable AC-plugs The following exchangeable AC plugs are available: Type 018110 - ”EURO”...
Need help?
Do you have a question about the LiFePO4 and is the answer not in the manual?
Questions and answers