Operation; Handle Setting - HTC 650 HDX Manual

Operation

The HTC 650 contains a number of functions that are
important to know prior to operation. Read carefully
through the functions of the various systems to ensure
you are fully familiar with them, allowing you to utilize
the grinder optimally.

Handle setting

Use the adjustable handle on the HTC 650 to set a sui-
table working height. A handle locking
mechanism is located on both the upper (see Picture 1)
and lower side of the handle cover. The handle can be
folded in several different positions (see Picture 2).
Picture.1..Release.the.handle.by.moving.the.two.round.safety.grips.
against each other. The handle now drops to the required fixed
position..Release.the.safety.grips.again.to.lock.
Forward position: Used when transporting etc. when
the grinder takes up substantially less space.
Up position: Is ideal when operating via the radio control
unit. Run the mains cable and if necessary the extrac-
tor hose through the handle in this case. This position
also applies when the machine is tilted backwards when
changing grinding tools.
Back position: Always use when operating the grinder
manually but can also be used when operating via radio
control.
Up.position
Back.position
Picture.2..Depending.on.the.type.of.work.task.a.suitable.position.can.
be.set.using.the.HTC.650's.adjustable.handle.
6
Forward.position