Table of Contents
Advertisement
Usage
4.2. Handle settings
The appropriate working height is set with the help of the
adjustable handle. Release the handle, by pulling the locking pin on
the handle lock, see Figure 3-2 on page 11. Adjust the handle to the
desired position and secure it, by inserting the locking pin again.
1
Figure 4-1 Handle settings
1.
2.
3.
4.3. Handling weights
The machine can be equipped with three weights to make it
easy to change the machine's grinding pressure, seeFigure
4-2 on page 17. When all three weights are mounted, they
16
The forward position - used, for instance, for
transportation, as the machine takes up significantly less
space.
Rear position - used for tipping the machine, so as to make
changing tools easier.
Working position - the working height can be adjusted to
two positions using the machine's adjustable handle.
HTC 500
2
3
1.0
Advertisement
Table of Contents
