Displaying And Maintaining E-Cpos Interfaces; E-Cpos Interface Configuration Examples; E-Cpos Interface Configuration Example 1 - HP HSR6800 Configuration Manual

Configuring the operating mode for a 155 Mbps E-CPOS interface
You can use the using command to configure a 155 Mbps E-CPOS interface to operate in channelized
mode or concatenated mode. To create POS channels, configure the concatenated mode. On a 155
Mbps E-CPOS interface in concatenated mode, you can create one 155 Mbps POS interface.
To configure the operating mode of a 155 Mbps E-CPOS interface:
Step
1. Enter system view.
2. Enter E-CPOS interface view.
3. Configure the 155 Mbps
E-CPOS interface to operate in
concatenated mode.

Displaying and maintaining E-CPOS interfaces

Task
Display information about all
channels of the specified E-CPOS
interface.
Display information about the
E3/T3 channels of the specified
E-CPOS interface.
Display information about the POS
channels of the specified E-CPOS
interface.
Clear the controller counter of the
specified E-CPOS interface.

E-CPOS interface configuration examples

E-CPOS interface configuration example 1

Network requirements
As shown in
Router A and Router B provide 622 Mbps E-CPOS interfaces, while Router C and Router D provide
•
155 Mbps E-CPOS interfaces.
Channelized interface POS 2/0/0/1:0 of Router A is connected to channelized interface POS
•
2/0/0/1:0 of Router B through an SDH transmission device.
Channelized interface POS 2/0/0/2:0 of Router A is connected to interface POS 2/0/0 of Router
•
C through an SDH transmission device.
Channelized interface POS 2/0/0/2:0 of Router B is connected to interface POS 2/0/0 of Router
•
D through an SDH transmission device.
Figure 21,
Command
system-view
controller e-cpos interface-number
using oc-3c
Command
display controller e-cpos [ e-cpos-number ] [ |
{ begin | exclude | include }
regular-expression ]
display interface serial interface-number [ |
{ begin | exclude | include }
regular-expression ]
display interface pos interface-number [ |
{ begin | exclude | include }
regular-expression ]
reset counters controller e-cpos
interface-number
78
Remarks
N/A
N/A
The default is the channelized
mode.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in user view.