Enabling Subinterface Rate Statistics Collection On A Serial Interface; Displaying And Maintaining Serial Interfaces; Configuring A Ce1 Interface - HP HSR6800 Configuration Manual

Enabling subinterface rate statistics collection on a
serial interface
CAUTION:
Use this function with caution, because it is system resource demanding.
After enabling subinterface rate statistics collection on a serial interface, the device periodically refreshes
the rate statistics for the subinterfaces of the serial interface. You can use the display interface command
to view the rate statistics.
Serial interfaces that support this feature include synchronous serial interfaces and sub-channel serial
interfaces.
To enable subinterface rate statistics collection for a serial subinterface:
Step
1. Enter system view.
2. Enter serial interface view.
3. Enable subinterface rate
statistics collection on the
serial interface.

Displaying and maintaining serial interfaces

Task
Display information about serial
interfaces.
Clear statistics for serial interface.

Configuring a CE1 interface

A CE1 interface can operate in either E1 mode (also called non-channelized mode) or CE1 mode (also
called channelized mode).
1. A CE1 interface in E1 mode provides 2.048 Mbps data bandwidth and cannot be divided into
timeslots. It has the same logical features as the synchronous serial interface. It supports link layer
protocols such as PPP and FR and the network protocol IP.
Command
system-view
interface interface-type
interface-number
sub-interface rate-statistic
Command
display interface [ serial ] [ brief [ down ] ]
[ | { begin | exclude | include }
regular-expression ]
display interface serial interface-number
[ brief ] [ | { begin | exclude | include }
regular-expression ]
reset counters interface [ serial
[ interface-number ] ]
25
Remarks
N/A
N/A
Optional.
Disabled by default.
Remarks
Available in any view.
Available in user view.