System Configuration; System Settings - Qsan AegisSAN Q500 Series User Manual

Qsan Document – User Manual
Enclosure
Management
System
Maintenance
Performance
Monitor
Quick Installation
Volume Creation
Wizard

System Configuration

The System Configuration menu option is for accessing the System Settings, Network Settings,
Login Settings, Email Notification Settings, and Log and Alert Settings option tabs.

System Settings

The System Settings tab is used to setup the system name and date. The default system name is
composed of the model name and the serial number of this system.
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Options: Set Quota / Rollback / Delete
Logical Units Attach LUN
Options: Detach LUN
QReplicas Create / Rebuild / QReplica Options / Shaping Setting Configuration
Options: Start / Stop / Set Task Shaping / Add Path / Delete Path /
Schedule / Delete / Add Connection / Delete Connection
Task Path options: Add Connection / Delete Connection / Delete
Hardware Show information for: < -Local- | -JBODn- >
Monitor Temperature (Internal)/(Case): < (C) / (F) >
Controller 1 Monitors / Controller 2 Monitors / Backplane
Options: Auto Shutdown
UPS UPS Type / Shutdown Battery Level (%) / Shutdown Delay (Seconds) /
Shutdown UPS / UPS Status / UPS Battery Level
SES [Enable | Disable]
S.M.A.R.T. Show information for: < -Local- | -JBODn- >
Temperature (Internal)/(Case): < (C) | (F) >
System Download System Information
information
Event log Event Log Level to Show: < Information | Warning | Error >
Download / Mute Buzzer / Clear
Upgrade Controller Module Firmware Update / JBOD Firmware Update /
Controller Mode / SSD Caching License
Firmware Apply
Synchronization
(This option is only
visible when dual
controllers are
inserted.)
Reset to Factory Reset
Default
Configuration Backup Import or Export / Import File
Volume Restoration Options: Restore
Reboot and Reboot / Shutdown
Shutdown Reboot options: [Both Controller 1 and Controller 2 | Controller 1 |
Controller 2]
Disk Show disk for: < -Local- | -JBODn- >
iSCSI Controller 1 / Controller 2
Fibre Channel Controller 1 / Controller 2
(This option is only
visible when the
controller has FC
ports.)
Step 1 / Step 2 / Step 3 / Step 4 / Confirm
Step 1 / Step 2 / Step 3 / Confirm
79