Power On / Off; Power On The System; Power Off The System - Qsan AegisSAN Q500 Series User Manual

Qsan Document – User Manual



Power ON / OFF

Power on the System

AegisSAN Q500 Series and AegisSAN V100 Series:
The power button is located at the right front handle. To turn on the system, you may press power
button once. After you turn the power ON, the system performs a booting process which takes a
few minutes.
AegisSAN LX Series (2U12 / 3U16 / 4U24):
The power switch is located at the rear of the panel. To turn on the system, you may press power
switch to "|". After you turn the power ON, the system performs a booting process which takes a
few minutes.

Power off the System

If it becomes necessary to power down the system, it is recommended using a normal, controlled
shutdown form through either the LCM or Web UI to ensure all data is flushed from the cache first.
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Attach the power cords and power on the system, and then power on the hosts and the iSNS
server (optional for iSCSI environment).
Start the configuration.
AegisSAN Q500
CAUTION:
Be aware that when Controller Health LED is in RED, please DO NOT plug out
the controller from the system or turn off the power suddenly. This may cause
unrecoverable damage, which will not be covered by warranty.
AegisSAN V100
60