Table of Contents
Advertisement
The table below shows the available USB LCM, model name, and its description.
Table 3-16
Model Name
LCM-U162
To learn more how to use USB LCM, please refer to the chapter 4.4, Accessing the
Management USB LCM in the
3.14. Discover and Carry Out the Initial Configuration for the System
After powering on the system, the next step is to discover the system on the network and
start the initial configuration. To discover the system, we suggest downloading our QFinder
application from the QSAN web site; this will hunt the network for your new SAN and allow
you to access it via the SANOS GUI. For more information about discovering your system
and the initial configuration, please refer to the chapter 3, Getting Started in the
SANOS 4.0 Software
Available USB LCM for XCubeSAN Series
Picture
XCubeSAN SANOS 4.0 Software
Manual.
Description
Portable USB LCM
Manual.
Installing the System Hardware
Applied Models
XS5200 Series
XS3200 Series
XS1200 Series
XCubeSAN
65
Advertisement
Table of Contents
