Rear Panel - Kenmore 385.16221300 Service Manual

SERVICE ACCESS
REAR PANEL
PRESSER FOOT LEVER
TWIST AND REMOVE THE ARM COVER
PART FROM THE PRESSER FOOT LEVER.
J
REAR PANEL UNIT
1. OPEN THE FACE COVER.
2. REMOVE THE TOP COVER UNIT (SEE P.6), THE BELT COVER (SEE P.8) AND
THE FRONT COVER (SEE P.9).
3. REMOVE THE SETSCREWS (A) ,(B), AND (C), AND LOOSEN THE SETSCREWS
(D,E AND F).
4. LOWER THE PRESSER FOOT LEVER, AND PULL AWAY THE REAR PANEL UNIT
FROM THE MACHINE FRAME. TWIST AND REMOVE THE ARM COVER PART
FROM THE PRESSER FOOT LEVER.
* WHEN YOU REATTACH THE REAR PANEL, PUT THE "WINDOW" ON THE PLASTIC
PANEL OVER THE PRESSER FOOT LEVER, AND THEN REPLACE THE SIX SCREWS.
11