Up/Down Needle Position Button; Control Panel - Kenmore 19501 Owner's Manual

Up/Down Needle Position Button
Control Panel
Smnsnrluw
70
Stitch
EW
M Sec
t
ion
FC E
ED
M
When you press this button, the needle will go up or down.
FTl F
I
Stitch Width
and Length
If the needle is up and you press this button, the needle will go down to its
W
J
Section
lowest position.
If the needle is down and you press this button, the needle will go to its
highest position.
Stitch Lock
Section
CAUTION: Do not press the foot control while you press the up/down
needle position button.
The Control Panel is divided into three sections:
The Stitch Pattern Section,
where
you
set stitch patterns, with memory
and clear buttons, and
- take up the bobbin thread (down and up) as you hold the top thread
convenient straight and zigzag stitch buttons,
- turn a corner (down to keep the fabric from slipping)
The Stitch Width and Length Section,
It eliminates the hand wheel for raising and lowering the needle,
where you set the length of straight stitches and the length and width of
zigzag stitches.
The Stitch-Lock Section,
with the Reverse and Auto-Lock buttons to secure your stitches either
manually or automatically.
29