Kenmore 385.16221300 Service Manual page 8

F
[]
[]
[]
[]
@
Automatic Needle Threader
[] Lower the presser foot. Depress the needle
threader knob as far as it will go.
The hook comes out through the needle eye
from behind,
(!) Needlethreader knob
(_) Hook
[] Draw the thread down around the threader
guide and under the hook.
(_) Threader guide
(_ Hook
[] Release the threader knob slowly while
holding the thread end with your hand.
A loop of the thread is pulled up through the
needle eye.
[] Remove the loop from the threader and pull
out the thread end from the needle eye.
NOTE:
The automatic threader works well with the
threads #50-100 and needles #11-16, the
blue tipped needle as weft.