NAP TIMER
The nap timer allows you to set a buzzer alarm to go off after a preset amount of time ranging from 90
minutes to 10 minutes.
1.
With radio off, press the
2.
Press the
> 50min > 40min > 30min > 20min > 10min > OFF
3.
When enabled, pressing the
will reset timer to 90 minutes
4.
When the NAP timer expires, it will continue to buzz for 30 minutes or it can be stopped by pressing
the POWER ON/OFF
5.
To cancel the NAP timer, press the
CYCLE DISPLAY
The CYCLE DISPLAY
front LED panel in sequence.
1.
Ensure radio is OFF (RADIO ON/OFF
on the side of the alarm clock until ON appears on the LED panel. Please wait 10 seconds for the
cycle to begin.
2.
To return to TIME display only, press and hold the CYCLE DISPLAY
on the LED panel.
ADJUSTING LED BRIGHTNESS
You can adjust the brightness of the LED display making it brighter, dimmer or even turning it OFF when
the radio is OFF. There are four dimming options available: HIGH/MEDIUM/LOW/OFF (Standby). Press the
symbol will appear on the LED screen when set to OFF to show that unit is in standby mode.
LISTENING TO THE RADIO
1.
Press the RADIO ON/OFF
2.
Press hold the AM/FM
3.
Press the
/
Press and hold the
4.
the stations; the unit will automatically scan to the next broadcasting station.
Press and hold the RADIO ON/OFF
5.
the radio OFF.
OPERATING INSTRUCTIONS
button to turn on NAP timer.
button to toggle through the preset times; 90min > 80min > 70min > 60min
button will show current NAP timer and pressing again
button.
function displays the TIME, MONTH/DAY & CURRENT TEMPERATURE on the
button). Press and hold the CYCLE DISPLAY
button to toggle between the four brightness settings. The
button on the front panel to turn the radio ON.
button to toggle between AM and FM radio bands.
buttons once, to move back/move forward one station at a time.
/
buttons for one second to scan back/forward through
button on the front panel to turn
- 20 -
button until you see OFF
button
button until OFF appears