Water Indicator - Sony Xperia miro ST23i Working Instructions

Replacement

4.12 Water Indicator

Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Water Indicator.
Carry out the Installation as described below.
Follow the 5.5 – 5.8 Reassembly instructions!
There are two Water Indicators as shown in picture.
REMOVAL
Gently detach to remove the Water Indicator by using a Flex
Film Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Place a new Water Indicator on the proper position as
indicated by the guiding rectangle.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
31(60)