Rubber Cap - Sony Xperia miro ST23i Working Instructions

Replacement
4.8

Rubber Cap

Follow the 3.1 – 3.2 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Rubber Cap.
Carry out the Installation as described below.
Follow the 5.5 – 5.8 Reassembly instructions!
REMOVAL
Detach to remove the Rubber Cap by using a Flex Film
Assembly Tool.
Be careful! Do not damage the RF connector under the
Rubber Cap!
Scrap! Not to be reused!
INSTALLATION
Place a new Rubber Cap on its proper position.
Press to secure its position.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
25(60)