Conductive Tape Receiver - Sony Xperia miro ST23i Working Instructions

Replacement

4.22 Conductive Tape Receiver

Follow the 3.1 – 3.8 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Conductive Tape Receiver.
Carry out the Installation as described below.
Follow the 5.1 – 5.8 Reassembly instructions!
REMOVAL
Detach to remove the Conductive Tape Receiver as shown.
Scrap! Not to be reused!
INSTALLATION
Place a new Conductive Tape Receiver on its proper
position.
Be careful! Do not cover the component and the metal
pin of the Audio Jack!
Press along to secure its position and attachment.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
38(60)