Core Unit Label - Sony Xperia miro ST23i Working Instructions

Replacement
4.2

Core Unit Label

Follow the 3.1 – 3.2 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Core Unit Label.
Carry out the Installation as described below.
Follow the 5.7 – 5.8 Reassembly instructions!
REMOVAL
Read the old Label Mobile Phone and write the information
into the 'Label Print Solution' program.
Carefully peel off to remove the Core Unit Label.
Scrap! Not to be reused!
Be careful! Do not damage the tape and the FPC Link
under the Core Unit Label!
INSTALLATION
Check that the proper label format is loaded in the Zebra
printer and write a new Label by using the 'Label Print
Solution' software.
One label only is allowed!
Press along the surface of the Core Unit Label to make it
securely attached as shown.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
16(60)