Core Unit Label; Tape Connector & Sub Board Assy - Sony Xperia miro ST23i Working Instructions

Disassembly
Do the same on the opposite side.
Gently lift up the Rear Cover Assy to release the hook on
the top side and remove it.
3.4

Core Unit Label

Carefully peel off the Core Unit Label by using a Flex Film
Assembly Tool.
Scrap! Not to be reused!
Be careful! Do not damage the tape and the FPC Link
under the Core Unit Label!
3.5 Tape Connector & Sub
Board Assy
Disconnect this end of the RF Cable.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
8(60)