Deco & Adhesive Deco - Sony Xperia miro ST23i Working Instructions

Replacement
4.10 Deco & Adhesive Deco
Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Deco and a new Adhesive Deco.
Carry out the Installation as described below.
Follow the 5.5 – 5.8 Reassembly instructions!
REMOVAL
Gently press the Main PBA with fingers to securely its
position and turn over the unit as shown.
Push against the back side of the Deco to make a gap
between the Deco and the Front Cover Assy by using a
Nylon Pointer.
Insert a Guitar Pick as shown and gently slide along to
release the Deco.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
27(60)