Rubber Proximity Sensor - Sony Xperia miro ST23i Working Instructions

Replacement

4.18 Rubber Proximity Sensor

Follow the 3.1 – 3.6 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Rubber Proximity Sensor.
Carry out the Installation as described below.
Follow the 5.3 – 5.8 Reassembly instructions!
REMOVAL
Gently pull upwards to remove the Rubber Proximity Sensor
as shown.
INSTALLATION
Place a new Rubber Proximity Sensor into its socket.
Press to secure its position.
1266-5134 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
36(60)