Ieee1394 Firewire Pin Connection Without Power ); Network Connection (Rj45) - ADS-tec mcr5000 User Manual

Industrial PCs MCR5000
5.4 IEEE1394 F
The FireWire interface is used for fast data exchange between peripherals, e.g. in
industrial and automotive electronics.
PIN NUMBER
Note:
The FireWire interface complies with the IEEE 1394a standard (FireWire 400).
5.5 N
ETWORK CONNECTION
If the drivers required for functioning are installed on the device, the control system may
be integrated in an Ethernet network supporting the 10/100/1000 Mbit standard by using
the Ethernet 10/100BaseT network connector. Specifications of this network topology must
be observed in this case. You can install the drivers required for functioning from the
enclosed service CD, should they not be installed on the device.
PIN NUMBER
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
4-
IREWIRE PIN CONNECTION
SIGNAL NAME
1
2
3
4
(RJ45)
SIGNAL NAME
1
2
3
4
5
6
7
8
(
WITHOUT POWER
TPB-
TPB+
TPA-
TPA+
TX +
TX -
RX +
NC
NC
RX -
NC
NC
)
27