Table of Contents
Advertisement
P
REPARATION FOR FIXING
Warning:
The MCR 5000 device is designated for installation with a TFT or plasma display. Before
the MCR 5000 can be fixed to the display, the respective brackets or retainers for
protecting the MCR 5000 from falling must be in place. The fall protection measures must
correspond to the "BGV C1" regulations.
Respective retainers must be installed above the MCR 5000 device. As soon as the
retainers have been installed, the device should be secured with these brackets or
retainers (as it can be seen in the figure, for example).
14
Industrial PCs MCR5000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Advertisement
Table of Contents
