Industrial PCs MCR5000
A
:
SSEMBLY
Please reverse the order of steps described before for re-assembling the MCR 5000 device.
Place the retaining clip on top of the newly inserted battery first. Subsequently fit the
screws to the battery compartment and to the MCR 5000 casing.
Observe the required security measures when attaching the installation adapter. You can
find
information
about
the
design
of
the
MCR
5000
device
incl.
its
TFT or plasma display in more detail in the user manual.
38
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen