Daikin FHC20JEVLK Installation Manual page 10

NOTE
Install the front frame panel rmly to prevent cool air leakage which will cause condensation and water dripping.
Cool
Air
Grille Lock Cover (The moving part protection for user direct touching)
Grille lock cover must be installed as the gure below.
If the unit need to be service, steps below shall be followed:
1. Con rm that the unit had been switched off before servicing the unit.
2. Use screwdriver to unlock the screw on the grille lock cover.
3. Remove the grille lock cover and open the intake grille for the service purpose.
4. Install the intake grille and screw the grille lock cover after service and make sure the unit is proper install.
Indoor Unit
Air Leak
Ceiling Board
Panel
Screw 4 x 6
1-8
Cool
Air
Air Leak
Frame
Intake Grille
Grille Lock Cover
(2pcs)
(2pcs)
Ceiling Board
Panel