Connecting The Cables - Avery Dennison Monarch AAFES kit User Manual

C o n n e c t i n g t h e C a b l e s
Warning: If the power supplies are not connected correctly, the
keyboard and printer are damaged.
Refer to the AAFES Setup Guide, included in your kit, for more
information on setting up the printer and keyboard.
Turn OFF the printer before you connect the keyboard's cable.
1.
Plug the 9-pin coiled keyboard cable into the end of the adaptor
2.
cable.
ON/OFF
Sw itch
Adaptor
Cable
Pow er
Connector
Keyboard
Pow er Supply (5V)
3. Attach the other end of the adaptor cable to the 9-pin port on the
printer. Tighten the screws on the cables.
1-4 User Manual
Optional Scanner
Cable
Keyboard
Cable goes here
Printer's
Pow er Supply
(24V)
Pow er
Cords