Frequency Of Charging/Run-Time Guidelines - Avery Dennison Mobile Work Station (MWS) Monarch 9876 Operating & Maintenance Instructions

F r e q u e n c y o f C h a r g i n g / R u n -T i m e G u i d e l i n e s
The following information is approximate and should be used for
reference. Many factors effect an individual battery's performance:
the presence of auxiliary devices
the printing rate (including printhead contrast and number of labels per
day)
the complexity of your printed formats
the environment (temperature and humidity in your facility or DC).
In the information below, "typical conditions" are as follows:
one Monarch printer printing standard compliance 4x6 labels (5-10 minutes
of actual printing per hour), no auxiliary devices attached to the MWS, and
standard environmental conditions (no excessive heat or humidity).
When using the 24VDC or Symbol 24VDC MWS under typical conditions,
the batteries may last up to 50 to 100 hours before recharging.
When using the AC Power Inverter or 24VDC/115VAC MWS under
typical conditions, the batteries may last up to 24 hours before
recharging.
When you notice the batteries need to be charged more frequently, order
replacement batteries. BOTH batteries MUST be replaced at the same
time to maintain capacity match. For example, if you had 60 hours of
use between charges and now have 30 hours of use between charges,
replace the batteries.
The performance of your batteries varies depending on
the number of printers and/or auxiliary devices, such as
a scanner or terminal, attached to the MWS. Frequent
charging of the batteries is recommended.
Charging the Batteries 3-5