Register Your Product Online At; Www.titantool.com; Proper Registration Will Serve As Proof; Of Purchase In The Event Your Original - Titan PROTOUCH Owner's Manual

Troubleshooting
Problem F: Runs and sags in paint
Cause
Arm movement too slow, holding spray gun too close or work
1.
surface, or applying too much paint at one time
Problem G: Material drips from spray tip guard
Cause
Guard is for safety and cannot be removed. Some dripping is
1.
unavoidable with some paints
Problem H: Motor overheats.
Cause
1. Seized piston
2. Operating continuously
Problem I: Material leaking from between spray tip and locking nut.
Cause
1. Spray tip is loose
2. Atomizer valve not positioned properly
3. Worn atomizer valve
4. Eroded pump housing
Have you tried the recommendations above and are still having problems? In the United States,
to speak to a customer service representative, call our Customer Service at 1-866-848-2698
monday through Friday between 8:00 Am and 4:30 pm Central time.
This sprayer contains no serviceable parts, besides
the atomizer valves, piston and spring, and spray tip
assemblies. Store indoors.
Solution
See section on spraying (page 8)
Solution
Use a small brush on drips that fall on surface being sprayed. Use a drop cloth
Solution
Clean piston
Release trigger at the end of a pass, allow to cool.
Solution
Tighten securely
Unplug the sprayer, remove the spray tip and reposition the atomizer valve
Replace
Replace the pump housing
17
Questions?
Call Titan Technical Service at:
1-866-848-2698

Register your product online at:

www.titantool.com

Proper registration will serve as proof of
purchase in the event your original receipt
becomes misplaced or lost.
English