Cleanup - Oil Based Materials - Titan PROTOUCH Owner's Manual

Cleanup -
oil based
materials
Start
You will need:
• Waste container
• Warm soapy water if you sprayed latex
materials
• Mineral spirits if you sprayed oil-based
materials
make sure you clean the sprayer in a
well-ventilated area whenever
cleaning with flammable solvents.
English
1
(a)
1. Press the black button (a) to
unlock the battery pack and
remove it.
4
4. Attach the container and
replace the battery pack.
Squeeze the trigger until the
solution comes through the
sprayer for several seconds.
12
2
2. Pour the remaining material
back into the original container.
Rinse the inside of the cup
with the appropriate cleaning
solution.
5
5. Remove the battery pack.
Remove the container and
properly dispose of the
remaining solution.
3
3. Fill the container half full of the
cleaning solution appropriate
to the type of material you
sprayed Replace the battery
pack.
6
6. Remove the suction tube.